ADTRAN SMART/RG SR506n, Руководство пользователя

Страница: 111 / 161

SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020 111
Field Name Description
Enable WMF Select to enable Wireless Multicast Forwarding (WMF).
Enable HSPOT Select to enable Hotspot 2.0 access.
Max Clients Enter the maximum number of clients that can connect to this access point.
BSSID Displays the Basic Service Set Identifier or "N/A" .
Security
On this page, you can configure network security settings of a wireless LAN interface, either by using the WiFi Protected Setup (WPS)
method or by setting the network authentication mode. For WiFi Protected Setup, the following methods are supported:
l
PIN entry, a mandatory method of setup for all WPS-certified devices. Options are:
l
Enter STA PIN : You must enter the (input) station PIN from the client.
l
Use AP PIN : AP generates the device PIN.
l
PBC (Push button configuration): Uses a simulated push button in the software. (This is an optional method on wireless cli-
ents.)
To use the PIN method, you need a Registrar (access point/wireless gateway) to initiate the registration between a new device and
an active access point/wireless gateway.
Note : The PBC method may also need a Registrar when the PIN is all zeros.
Seven types of network authentication modes are supported: Open, Shared, 802.1X, WPA2, WPA2-PSK, Mixed WPA2/WPA, and Mixed
WPA2/WPA-PSK.