ADTRAN MX3216 Скачать руководство пользователя страница 119

Страница: 119 / 190

Section 6, User Interface - Menu Descriptions

61189008L1-1B

6-55

Edit Menu

The Edit menu (see

Figure 6-36

) is used to edit or delete user accounts.

Figure 6-36. Edit Menu

The Edit menu options are shown in

Table 6-31

Table 6-31. Edit Menu Options

Option

Description

Function

Enable/Disable User Account

This option is used to enable or disable a user
account. Options are as follows:

• Disabled
• Enabled

The ADMIN account can not be disabled.

Access Rights

This option sets the access rights level for the
selected account. Options are as follows:

• READ: This level allows the user to see, but not

change the current system configuration.

• TEST: This level allows system testing.
• READ/WRITE: This level allows the user to

both see and change system configuration
parameters.

• ADMIN: This level is reserved for system or net-

work administrators.

Change Password

This option is used to enter a new password.

Delete User

This option is used to delete a user account.

Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216

MX3216->Provisioning->Security Administration->Edit Accounts->Edit

User: ADMIN

                1 - Enable/Disable User Account : ENABLED
                2 - Access Rights                : ADMIN
                3 - Change Password
                4 - Delete User

Selection : '?' - System Help Screen

Содержание MX3216































































































































































































Результаты поиска

Содержание MX3216

Отзывы:

Бренды по названию

Популярные бренды

ADTRAN MX3216, Системное руководство

Результаты поиска

Содержание MX3216

Отзывы:

Бренды по названию

Популярные бренды