background image

18    

Issue 5, February 2011

61213075L2-5E

The 24-hour performance data registers (

Figure 17

) are 

available for the current day and the past 30 days. 

The 30-day performance data registers (

Figure 18

)

 are 

available for the current 30 days and three previous 

 

30-day periods. All performance data registers can be 
reset by the

 Reset Data

 option. This reset must be 

confirmed by choosing 

Y

 on the warning screen (not 

shown).

The 

MSEC

 (Measured Seconds) parameter is a count of 

how many seconds have elapsed during the current 
interval displayed on the Performance History screen. 
The count will reset to zero when the performance 
history data is reset, or if the date or time is changed. 
The count will automatically restart when the current 
interval being observed ends and a new current interval 
begins.

Figure 17.  24-Hour Performance History

Figure 18.  30-Day Performance History

CIRCUIT ID: xxxxxxx                                               03/01/04  13:04:03
                     Press ESC to return to previous menu

            Menu                 24 Hour Network Far End Performance Data

       1. Definitions        Page 1 of 1      ES-P  SES-P UAS-P CV-P
       2. Reset Data         MSEC      00000  00000 00000 00000 0000000
       3. 15 Min Data                  03/01  00000 00000 00000 0000000
       4. 60 Min Data                  02/29  00000 00000 00000 0000000
       5. 24 Hr Data                   02/28  00000 00000 00000 0000000
       6. 30 Day Data                  02/27  00000 00000 00000 0000000
       7. ----------                   02/26  00000 00000 00000 0000000
       8. Path Data 1                  02/25  00000 00000 00000 0000000
       9. Path Data 2                  02/24  00000 00000 00000 0000000
      10. Network Near End             02/23  00000 00000 00000 0000000
      11. Customer Near End            02/22  00000 00000 00000 0000000
      12. Network Far End              02/21  00000 00000 00000 0000000
      13. Customer Far End             02/20  00000 00000 00000 0000000
      14. Change Thresholds            02/19  00000 00000 00000 0000000
                                                                    ____
                                                              -10->|    |--->13
                                                                   |N  C|
                                                             12<---|____|<-11-
                                  Selection:

CIRCUIT ID: xxxxxxx                                               03/01/04  13:04:03
                     Press ESC to return to previous menu

               Menu              30 Day Network Near End Performance Data

         1.  Definitions         PAGE 1 of 1     ES-L   SES-L   LOSS-L   CV-L
         2.  Reset Data         MSECs 0000082  0000098 0000097 0000097 0000007
         3.  15 Min Data        Ending: 02/31  0000293 0000293 0000293 0000000
         4.  60 Min Data        Ending: 01/01  0000313 0000313 0000313 0000000
         5.  24 Hr Data         Ending: 11/30  0002285 0000929 0000376 0002704
         6.  30 Day Data
         7.  Line Data
         8.  Path Data 1
         9.  Path Data 2
        10.  Network Near End
        11.  Customer Near End
        12.  Network Far End
        13.  Customer Far End
        14.  Change Thresholds
                                                            ____
                                                      -10->|    |--->13
                                                           |N  C|
                                                     12<---|____|<-11-
                                  Selection:

Содержание DS3 NIU3 PM































Отзывы: