ADTRAN ATLAS, Руководство пользователя

Страница: 58 / 106

Chapter 5. Connecting Packet Endpoints
5-6 ATLAS Frame Relay User Manual 61200263L1-1.1
P
KT
V
OICE
ATLAS provides the same level of capability for packet-switched voice as
originally provided for circuit-switched voice.
I
NTERFACE
C
ONFIGURATION
(under D
IAL
P
LAN
> U
SER
T
ERM
or N
ETWORK
T
ERM
) sets configuration parameters for the endpoint. These parameters
vary by the type of port selected. The following section describes the config-
uration options available for packet-switched voice (see Figure 5-10). The
D
IAL
P
LAN
is only accessible when you are using the terminal mode.
The first step in configuring the D
IAL
P
LAN
for packet voice is to select
N
ETWORK
T
ERM
or U
SER
T
ERM
. Refer to the ATLAS 800
PLUS
User Manual for
details on determining N
ETWORK
T
ERM
or U
SER
T
ERM
(see also Network Term
on page 5-8 and User Term on page 5-8). Once this selection is made, a
number of fields become available. These fields are discussed in the
following sections.
Figure 5-10. Packet Switched Voice Options
S
LOT
/S
VC
Write Security: 3; Read Security: 5
Select P
KT
V
OICE
as the service.
P
RT
/PEP Write Security: 3; Read Security: 5
Select the port/packet endpoint that you want to configure.
S
IG
Not used for packet voice.
I
N
#A
CCEPT
Write Security: 3; Read Security: 5
Configured as defined in the ATLAS 800
PLUS
User Manual.
O
UT
#R
EJ
Write Security: 3; Read Security: 5
Configured as defined in the ATLAS 800
PLUS
User Manual.
I
FCE
C
ONFIG
Write Security: 3; Read Security: 5
Provides interface configuration parameters (see Figure 5-11).
Figure 5-11. Interface Configuration Panel