ADTRAN ATLAS, Руководство пользователя

Страница: 37 / 106

Chapter 4. Defining Packet Endpoints
61200263L1-1.1 ATLAS Frame Relay User Manual 4-9
DE D
ISCARD
C
OUNT
Total number of Discard Eligible bits that have been received on this
PVC.
FECN C
OUNT
Total number of FECN bits received on this PVC.
R
ESET
C
OUNTERS
Resets all sublink counters.
C
ONFIG
Creates and configures packet endpoints (see the menu tree in Figure 4-8).
Figure 4-8. Config Menu Tree
E
NDPNT
N
AME
Write Security: 3; Read Security: 5
Simplifies configuration with user-definable names such as the name of the
frame relay provider or the circuit ID.
P
ROTOCOL
Write Security: 3; Read Security: 5
Defines the protocol operating on this port.
F
RAME
R
ELAY
configures this
packet endpoint to frame relay.
TBOP
configures this packet endpoint as
transparent bit oriented protocol.
PPP
configures this packet endpoint as
point-to-point protocol.
C
ONFIG
Write Security: 3; Read Security: 5
Displays the configuration for this packet endpoint. This menu is protocol-
dependent. TBOP requires no configuration. The selections for this menu
when Frame Relay is the protocol are listed in Config (Frame Relay as proto-
col) on page 4-10 and shown in Figure 4-9 , and the selections for this menu
when PPP is the protocol are listed in Config (PPP as protocol) on page 4-13
and shown in Figure 4-9.
Status Endpnt Name
Packet Endpnts Performance Protocol Frame Relay
Packet Manager Packet Cncts Config Config TBOP
Cncts Sort Test Sublinks PPP
Frame Relay IQ Endpnt Count Usage
Endpnts Sort