background image

61225236L1-5A

Issue 1, August 2003

    5

5. OPERATION

Test Capabilities

The SHDSL T1/E1 NTU has the following test capabil-
ities:

• Self diagnostics
• Local loopbacks
• EOC initiated remote loopbacks
• Inband remote loopback detection (E1 mode only)
• Internal bit error rate tester (BERT)

Self Diagnostics

The SHDSL T1/E1 NTU performs self diagnostic tests 
of its Read Only Memory (ROM), Random Access 
Memory (RAM), LEDs, and non-volatile configuration 
setting upon power-up.

Local and Remote Loopbacks

For troubleshooting purposes, the SHDSL T1/E1 NTU 
provides three types of loopback tests. 

1. Dual sided
2. Network
3. Customer

Inband Loopback Detection

Inband remote loopback response is supported on the 
E1 port. The SHDSL T1/E1 NTU supports V.54 and 
PN127 inband signalling protocols.

BERT

The SHDSL T1/E1 NTU contains a built-in Bit Error 
Rate Test (BERT). The BERT involves injecting and 
detecting a Pseudorandom Binary Sequence (PRBS) 
toward the network on the selected payload (i.e. G.703 
or entire SHDSL payload). The PRBS used in the 
SHDSL T1/E1 NTU is PRS15 as defined in ITU-T 
0.150 and 0.151. It is also known as 

2e15 – 1

 pattern.

Customer Port

The SHDSL T1/E1 NTU operates in either E1 mode or 
T1 mode. 

E1 Mode

In E1 mode the port features are as follows: 

• Carries information at the rate of 2.048 Mbps 
• Uses CCS framed format with or without CRC-4
• Operates in either Alternate Mark Inversion (AMI) 

or High-Density Bipolar 3 (HDB3) line code

• Provides programmable timeslot idle pattern
• Supports ISDN-PRA V3 service
• Displays additional status information via a local 

VT100 management screen

See 

Table 5

 

for E1 port statistics definitions.

T1 Mode

In T1 mode the port features are as follows: 

• Carries information at the rate of 1.544 Mbps
• Uses Superframe Format (SF) or Extended Super-

frame Format (ESF)

• Operates in either Alternate Mark Inversion (AMI) 

or Bipolar w/8-Zero Substitution (B8ZS) line code

• Provides programmable timeslot idle pattern
• Monitors the Facility Data Link (FDL) for loopback 

commands

• Displays additional status information via a local 

VT100 management screen

See 

Table 6

 

for T1 port statistics definitions.

Содержание 1225236L1











Отзывы: