ADTRAN 1200884G1, Руководство по установке оборудования

Страница: 35 / 48

1 Attach the mounting brackets (P/N 1700512F1) to the two chassis using the provided screws
(see
Figure 18 ).
2 Decide on a location for the NetVanta. NetVanta 1531/1531P/1534/1544 units are mounted
with the front panel facing down, left, or right (see
Figure 18 ). Keep in mind that the unit needs
to be mounted at or above eye level so that the LEDs of both units are viewable.
3 Prepare the mounting surface by attaching a board (typically plywood, 3/4-inch to 1-inch thick)
to a wall stud using #6 to #10 (2.5-inch or greater in length) wood screws.
Important! Mounting to a stud ensures stability. Using sheetrock anchors may not provide
sufficient long-term stability.
4 Have an assistant hold the units in position as you install two #6 to #10 wood screws (1 inch or
greater in length) through the unit’s brackets and into the mounted board.
5 Proceed to the steps given in Supplying Power to the Unit on page 37 .
Ensure that the proper mounting orientation is followed for both units being installed in
the dual wallmount configuration. Refer to the appropriate hardware installation guide for
installation instructions for each unit.
NetVanta 1531/1534/1544 Series Unit Installation
61702590G1-34H Copyright © 2019 ADTRAN, Inc. 35
Figure 18. NetVanta 1531/1531P/1534/1544 Dual Wallmount Installation
Instructions for Dual Wall Mounting NetVanta 1531/1531P/1534/1544
Step Action