ADTRAN 1200884G1, Руководство по установке оборудования

Страница: 12 / 48

Physical Descriptions NetVanta 1531/1534/1544 Series
12 Copyright © 2019 ADTRAN, Inc. 61702590G1-34H
NetVanta 1531P Front Panel Design
The NetVanta 1531P front panel is shown below. Table 1 on page 25 describes all of the LEDs, and

Appendix A on page 47 shows the connector pinouts.
1 2 3 4 5 6 7 8 9 10
STAT
LINK/ACT
PoE
CONSOLE
11 12
NetVanta1531P
Figure 3. NetVanta 1531P Front Panel Layout
Front Panel Features
Status LED
The STAT LED is located on the left side of the unit and indicates the unit’s status.
Link/Activity LED
The LINK/ACT LED is located on the left side of the unit and indicates that the port LEDs 1 through
8 are displaying link/activity status.
Power over Ethernet LED
The PoE LED is located on the left side of the unit and indicates that the port LEDs 1 through 8 are
displaying PoE status.
LED Mode Switch
The LED mode switch is located on the left side of the unit and is used to toggle Ports 1 through 8
between link/activity and PoE display modes.
CONSOLE Interface
The CONSOLE interface is an EIA-232 serial port (DCE) that provides local management and
configuration (via a DB-9 female connector). Refer to Table A-1 on page 47 for pinouts.
Connection directly to an external modem requires a cross-over cable.
10/100/1000Base-T Ethernet Interfaces
The front panel contains 10 10/100/1000Base-T Ethernet interfaces (RJ-45). These interfaces are
arranged in stacked pairs, with the numbers
1 through 10 screened from left to right directly above the
corresponding ports. Status LEDs for each stacked pair of interfaces are located directly over the
interfaces. Refer to
Table A-2 on page 47 for pinouts.
SFP Slots
The front panel contains two industry standard SFP slots for fiber connectivity. The interfaces
numbered
11 and 12 support 1000Base-X SFP modules and their status LEDs are located directly
above the interfaces. Refer to Table A-3 on page 48 for pinouts.