Physical Descriptions
NetVanta 1531/1534/1544 Series
22
Copyright © 2019 ADTRAN, Inc.
61702590G1-34H
Redundant Power Supply LED
The
RPS
LED is located on the left side of the unit and indicates when the unit is receiving power
from the RPS.
Extended Power Supply LED
The
EPS
LED is located on the left side of the unit and indicates when the unit is receiving power from
the EPS.
Link/Activity LEDs
The
LINK/ACT
LED is located on the left side of the unit and indicates that the port LEDs are
displaying link/activity status.
Power over Ethernet LED
The
PoE
LED is located on the left side of the unit and indicates that the port LEDs are displaying PoE
status.
VCID LED (Future Release)
The
VCID
LED is located on the left side of the unit and indicates that the port LEDs are displaying
VCID.
LED Mode Switch
The LED mode switch is located on the left side of the unit and is used to toggle Ports
1
through
48
between link/activity and VCID display modes.
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE) that provides local management and
configuration (via a DB-9 female connector). Refer to
for pinouts.
Connection directly to an external modem requires a cross-over cable.
10/100/1000Base-T Ethernet Interfaces
The front panel contains 24 10/100/1000Base-T Ethernet interfaces (RJ-45). These interfaces are
arranged in stacked pairs, with the numbers
1
through
24
screened from left to right directly above the
corresponding ports. Status LEDs for each stacked pair of interfaces are located directly over the
interfaces. Refer to
for pinouts.
SFP Slots
The front panel contains four industry standard SFP slots for fiber or copper connectivity. These
interfaces are numbered
25
through
28
and their status LEDs are located directly above these numbers.
Refer to
for pinouts.
