55
Figure 35: EDS Registration
Click “Browse”, select the interface card’s EDS file, and click “Next”.
5)
Ensure that there are no errors in the test results. Click “Next”.
6)
A graphic image of the interface card is displayed. Click “Next”.
7)
The task summary will list the interface card as the device to register. Click “Next”.
8)
“You have successfully completed the EDS Wizard”. Click “Finish”.
9)
The interface card is now available as a module.
10) Right click on the 1756-ENBT/A node under the “I/O Configuration” in the controller organizer view
and choose “New Module…”
11) Find the interface card in the “Select Module” dialog box as shown in Figure 36.
Figure 36: Adding a New Interface Card Module
Select the interface card and click “Create”.