OPC7000 series
3
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
1 Notes
1.1 General remark
This instruction manual is intended to ensure safe and efficient handling of the device. It must be
accessible to all persons who are involved in installation and commissioning of the device and must be
read and understood before any work is started.
The instruction manual must be passed on to the device/system operator after commissioning has been
completed.
All of the safety notices and handling instructions given in the manual must be obeyed in order to
ensure that work is carried out safely.
Figures used in this instruction manual are provided for basic understanding and may differ from the
actual design.
The original version of this instruction manual was written in German. All non-German versions of this
instruction manual are translations of the German instruction manual.
1.2 Limitation of liability
ads-tec GmbH shall not be liable for personal injury, property damage or damage caused to the device
as well as consequential damage that is/was the result of non-compliance with this instruction manual,
improper use of the device, repairs and other actions on the device by unqualified electricians and
electricians not certified by ADS-TEC, or that is/was the result of using unapproved replacement parts.
Failure to observe the maintenance intervals shall also result in exclusion from liability.
Furthermore, it is strictly forbidden to make any unauthorised alterations or technical modifications to
the device.
1.3 Manufacturer
The manufacturer of the product is ads-tec Industrial IT GmbH. The company is referred to in the
following as ADS-TEC.
