OPC7000 series
9
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2.9 Standards
The manufacturer hereby declares that this device has been marked with the CE
mark in accordance with the basic requirements and other relevant conditions of
the following European Directives:
•
2011/65/EU, RoHs Directive
•
2014/30/EU, EMC Directive
•
2014/53/EU, RED Directive
•
2014/35/EU, Low Voltage Directive
A corresponding EU conformity declaration is available for competent authorities at the
manufacturer and can be viewed upon request.
The EU conformity declaration can be requested at
http://www.ads-tec.de/support/support-anfrage.html and is available for download at
http://www.ads-tec.de/support/download/eg-konformitaetserklaerung.html.
Recommendation for use:
For full compliance with the EMC legislation, all components and cables
used for device connection must also be compliant with these requirements.
It is therefore necessary to employ BUS and LAN cables with shielded
connectors and these must be installed as per the instructions contained in
the instruction manual.
2.10 Scope of delivery
Please check that all of the following components are contained in the packaging:
•
1 x device
•
1 x 3-pole lead-through connector
•
QuickStartGuide
Optional scope of delivery:
•
Operating system
