36
Chapter 5 HOT SWAP
REMOVING / INSTALLING HARD DISK DRIVES (CONT’D)
(CONT’D)
Step 3.
Unscrew and unplug the cables
Unscrew
Unplug
Cables
Replace with a new Hard Disk Drive
It must be same capacity or greater than the faulty drive, if you replace with a Hard disk Drive of
insuffi cient capacity, the Disk Array’s built-in buzzer will sound and the intelligent Auto-Rebuild
function will not be started.
* For best performance, we recommend you swap with an identical Hard Disk Drive.
Step 5. Gently Slide-in the HDD tray and lock up to start the Auto-Rebuild
When you have installed the replacement disk drive, screw in all the screws and plug in the
cables, you may now gently slide in the HDD tray into the chassis and lock up it.
*Data Auto-Rebuild will be started automatically when you lock up the HDD tray.
