21
STARTING THE CONFIGURATION
1. Power-on the Disk Array. At the end of the power-on self test program, the LCD display
the current system status.
2. Press the front panel “
Enter
” key to access the built-in confi guration program.
3. When the screen displays the password prompt and asks you to “enter Password”
Enter Password
0 _ _ _
press “Enter” 4 times to input the default password
(default password is “0000”)
4. Re-Confi guration RAID
Select “
NO
” to just set up “Password”
Select “
Yes
” to set up “RAID Level”,”Hot spare disk “and “Password”
5. Set RAID Level
Move cursor (
↓↑
) to the desired RAID Level (
0,1,3,5,0+1,None
), press “Enter” to confi rm.
Warning
All data on the disk drives will be lost by changing the RAID Level.
*RAID Level “
None
”
= No Confi guration
6. Set Hot Spare Disk
Select “
Yes
” to set one Disk Drive as a Hot-spare Disk.
(Valid for RAID Level 5 and 3, the total number of Disk Drives installed must be
more
than 3 Disk Drives
)
7. Set Password
Press “
Enter
” to activate the Password setting. When the cursor stop on the desired
“number” or “character”, Using “↓”and “↑” function keys to choose the desired characters
and then press “
Enter
” to confi rm it.
* Press “
ESC
” function key for password “
No Change
”
8.
Save Confi guration & Restart
Select the Save Confi guration function and Press the “Enter” key to save and activate
your selections.
STOP Warning! All data will be lost if you change RAID Levels.
Warning
Saving confi guration changes causes the disk array controller’s working
parameters to change. This can produce unpredictable results if it occurs during
Host and Array activity. All activity to the controller should be stopped before
saving confi guration changes.
Chapter 3 CONFIGURATION
