ADLINK Technology Q7-BT, Техническое описание

Страница: 14 / 50

8 Product Overview
Use a commercial, high-quality display cable to connect an HDMI display. Connect a USB key-
board or mouse to the carrier. Use the SATA cable to connect the hard disk. Make sure that the
pins match their counterparts correctly and are not twisted. If you plan to use additional periph-
erals, connect them to the appropriate headers or connectors on the carrier.
Connect a power supply to the power connector on the carrier and switch on the power.
The display shows the BIOS messages. If you want to change the standard BIOS settings,
press the <DEL> key to enter the BIOS setup menus. See Chapter 4 for setup details.
If you need to load the BIOS default values, they can be automatically loaded at boot time.
The Q7-BT boots from CD drives, USB sticks, hard disks, or µSD-Cards. Provided that any of
these is connected and contains a valid operating system image, the display then shows the
boot screen of your operating system.
The Q7-BT needs adequate cooling measures depending on the desired operating temperature
range. Using the board without cooling could damage the board permanently.
Never connect or disconnect peripherals like HDDs
while the power supply is connected and switched on.
Observe the minimum voltage values for the standard
peripherals mentioned. For additional peripherals,
make sure enough power is available. The system will
not work if there is not enough supply current for all
your devices.
CAUTION:
NOTE: