ADLINK Technology NeuronBot Скачать руководство пользователя страница 32

Страница: 32 / 77

Operating Instructions

•

Enable the menu

menu_enable: "true" to enable the menu, “false” to disable the menu

•

Set the default ROS option

ros_option: "menu" to show all the options of the menu.

Note:

You can also set an option number to this variable and the menu will automatically apply the option every

time you open the terminal.

•

Modify ROS options separately:

The following parameters are needed to create a new option for the menu:

ROS 1:

ROS_version: 1

distro_name: the name of the ROS 1 version you are using

ros1_path: the path where ROS 1 is located

master_ip: sets the IP address of the master if the master isn't on the current computer

cmds: source your ROS 1 workspace here

ROS 2:

ROS_version: 2

distro_name: the name of the ROS 2 version you are using

ros2_path: the path where ROS 2 is located

domain_id: sets the Domain ID for DDS communication. Keep this empty to use

$default_ros_domain_id(30)

cmds: source your ROS 2 workspace here. Remarks:

source_plugin dds_bashrc

is necessary every

time you use ROS 2

ROS2/ROS1_bridge:

ROS_version: bridge

ros1_version_name: the name of the ROS 1 version you are using

ros2_version_name: the name of the ROS 2 version you are using

ros1_path: the path where ROS 1 is located

ros2_path: the path where ROS 2 is located

master_ip: sets the IP address of the master if master isn't on the current computer

domain_id: sest the Domain ID for DDS communication. Keep empty to use

$default_ros_domain_id(30)

cmds: any command you want to run every time using ROS Bridge. Remarks:

source_plugin

dds_bashrc

and

ros2 run ros1_bridge dynamic_bridge --bridge-all-topics

is necessary

every time using ROS Bridge

5.1.4.4.

Menu Upgrade

You can upgrade the Neuron Startup Menu by executing the following command:

The new version will load the next time you open the terminal.

ros_menu_upgrade

Содержание NeuronBot














































































Результаты поиска

Содержание NeuronBot

Отзывы:

ADLINK Technology NeuronBot, Руководство пользователя, Страница: 32 / 77

Результаты поиска

Содержание NeuronBot

Отзывы: