manualshive.com logo in svg

ADLINK Technology cPCI-3915A, Руководство пользователя

Поделиться
Скачать
ADLINK Technology cPCI-3915A Скачать руководство пользователя страница 90

80

Important Safety Instructions

X

Openings in the case are provided for ventilation. Do not
block or cover these openings. Make sure there is adequate
space around the system for ventilation when setting up the
work area. Never insert objects of any kind into the ventila-
tion openings.

X

To avoid electrical shock, always unplug all power and
modem cables from the wall outlets before removing cov-
ers.

X

Lithium Battery provided (real time clock battery)

“CAUTION - Risk of explosion if battery is replaced by
an incorrect type. Dispose used batteries as instructed
in the instructions”

X

The equipment should be checked by service personnel if
one of the following situation arises:

Z

The power cord or plug is damaged.

Z

Liquid has penetrated the equipment.

Z

The equipment has been exposed to moisture.

Z

The equipment is not functioning or does not function 
according to the user’s manual.

Z

The equipment has been dropped and damaged.

Z

If the equipment has obvious sign of breakage.

X

Never open the equipment. For safety reasons, the equip-
ment should only be opened by qualified service personnel.

Содержание cPCI-3915A





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды