manualshive.com logo in svg

ADLINK Technology cPCI-3915A, Руководство пользователя

Поделиться
Скачать
ADLINK Technology cPCI-3915A Скачать руководство пользователя страница 49

Getting Started

 39

5

Getting Started

This chapter explains installation of the following components to
the cPCI-3915:

X

CPU and heat sink

X

Memory module

X

2.5” hard disk drive

X

CF card

X

CPU module

X

RTM

5.1

Installing the CPU and Heatsink

The cPCI-3915 supports single Intel® Pentium® M/ Intel® Cele-
ron® M processor. A proprietary heat sink is included in the pack-
age for thermal control. Follow these procedures to install the CPU
and heat sink. If the CPU and heat sink comes pre- installed on
the cPCI-3915, proceed to the next section.

CPU Installation

To install the CPU:

1. Turn the CPU lock screw counter-clockwise.

2. Carefully place the CPU into the CPU socket as shown

in Figure 5-1: CPU Installation. Make sure the gold trian-
gle on the corner of the CPU matches with the triangular
mark in the corner of the socket.

3. Gently press the CPU until it is properly seated on the

socket, then turn the CPU lock screw clockwise to lock
the CPU positioning place.

4. Prepare the thermal pad included in the heat sink kit,

then peel the mylar film from the white side of the ther-
mal pad.

5. Place the thermal pad on top of the CPU and North-

bridge as shown (pink side up), then remove the plastic
film on top of the thermal pad.

Содержание cPCI-3915A





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды