Adler ADCHARGER 15, Инструкция по эксплуатации

Страница: 7 / 11

2.
Battery Selection Button sets the type of battery to be
charged to one of the following:
GEL CELL / SLA
–
All type of
“g el cell” & “SLA” type battery.
Regular
– All type of “lead acid” battery, sealed or non-seal.
3. Mode Display sets and shows one of the following reading:
Output current
– shows selected charging current.
Battery voltage
– shows voltage of the battery in DC.
Charging %
– shows an estimate percentage of charge.
With the exception of gel cell and calcium batteries, all other
battery types may or may not have vent caps. Vent caps are
located on top of the battery and provide a means to add distilled
water when needed.
Batteries should be marked with their type. If charging a
battery that is not marked, check the manual of the item that
uses the battery. If the battery type is unknown, us
e the “Gel
Cell / SLA” setting.
Charging
Insert the AC plug into the mains supply (220-240 Volts AC only).