Be sure to position the charger power cord to prevent it from
being stepped on, tripped over, or damaged.
Never pull out the plug by the cord when unplugging the charger.
Pulling on the cord may cause damage to the cord or the plug.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons.
PRE-CHARGE CHECKLIST
If the battery needs to be removed from the vehicle before
charging, always remove the grounded terminal from the battery
first, also ensure that all accessories in the vehicle are tuned off to
prevent arcing.
Make sure that the surrounding area is well ventilated to allow
dispersal of toxic fumes or gases.
Make sure the battery terminals are clean. If the battery has a
removable vent cap, top up each battery cell with distilled water to
the level recommended by the battery manufacturer, do not
overfill.
If the battery does not have caps, refer to the manufacturer’s
instructions regarding charging and charging rates.
OPERATING INSTRUCTIONS
Connection
1. Connect the DC Clamps to the battery poles in the following
order:
2. Connect the positive charging lead (RED) to the positive
terminal pole of the battery (marked P or +).
3. Connect the negative lead (BLACK) to the negative pole of the
battery (marked N or -).
Содержание ADCHARGER 15
Страница 1: ......