ADJ Products, LLC - www.adj.com - Vizi Hex Wash7 Instruction Manual
Page
9
Vizi Hex Wash7
Clamp Mounting
NOTICE:
The suitable environmental temperature for this lighting fixture is between -25˚
C to 45˚ C. Do not place this lighting fixture in an environment where the temperatures
are under or above the temperatures stated above. This will allow the fixture to run at
its best and help prolong the fixture life.
Screw one clamp each via a M12 screw and nut onto the Omega holders. Insert the
quick-lock fasteners of the Omega holders into the respective holes on the bottom of
the Vizi Hex Wash7. Tighten the quick-lock fasteners fully clockwise. Install the second
Omega holder. Pull the safety-cable through the holes on the bottom of the base and
over the trussing system or a safe fixation spot. Insert the end in the carabiner and
tighten the safety screw.
3
1
2
