ADJ Products, LLC - www.adj.com - Vizi Hex Wash7 Instruction Manual
Page
43
Vizi Hex Wash7
System Menu
Calibrate
- With this function you can calibrate and adjust the effects wheels to their
correct positions. The Calibration password 050.
NOTE: ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons
so that
“Test”
is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until
“Calibrate”
is displayed, press ENTER.
3. “XXXX” will be displayed. The password is 050.
4. Press ENTER to confirm or press MODE to exit.
PROGRAM
EDIT PROGRAM: -
The fixture comes equipped with a built-in DMX recorder that allows
custom programs to be installed and recalled directly from the fixture’s control board.
Programs can be created and stored using the fixture’s control board or by using an
external DMX controller.
Select. Pro –
This function allows the user to select one of nine of the user defined built-
in programs. This program is then accessed in “Function Mode” under “Program Run.”
Edit. Pro –
This function allows the user to edit the built-in programs.
Edit. Sce –
This function allows the user to edit or define the actual scenes that are
stored in the user defined built-in programs that are accessed in the previous step.
Sce. Input -
The Vizi Hex Wash7 features an integrated DMX recorder. Preprogrammed
scenes can be transmitted to the fixture via any DMX compliant controller. This function
allows those scenes to be stored in to the fixture’s built-in memory and then
subsequently used to create the user-defined programs.
