ADJ Products, LLC - www.adj.com - Vizi Hex Wash7 Instruction Manual
Page
30
Vizi Hex Wash7
System Menu
EXAMPLE:
If you want the address to be 57, you must first set the address that is
currently assingned to the unit. Then set Channel 1’s value to “7”, Channel 2’s value to
“7”, and Channel 3’s value to “57”. Wait 20 seconds and the address should change on
the unit to “57”.
2ND EXAMPLE:
If you want the address to be 420, you must first set the address that
is currently assingned to the unit. If you want the set the address to 420, set Channel 1’s
value to “7”, Channel 2’s value to “8”, and Channel 3’s to “164”. (256 + 164 = 420).
No
DMX Mode
- With this function if the DMX signal is suddenly lost, the unit will
automatically go into 1 of 3 modes.
1.
Press the MODE button to access the main menu. Press the UP or DOWN buttons
so that
“Function”
is highlighted, then press ENTER.
2.
Press the LEFT or RIGHT buttons until
“Status”
is displayed, press ENTER.
3.
Press LEFT or RIGHT buttons, until
“No DMX Mode”
is displayed, and press
ENTER.
4.
Either
“Hold”
(Last DMX setting),
“Blackout”,
or
“Auto”
(Auto Program) will be
displayed, use the LEFT or RIGHT buttons to toggle between.
5.
Press ENTER to confirm your selection or press MODE to exit.
Pan Invert
- With this function you can reverse the Pan movement.
1.
Press the MODE button to access the main menu. Press the UP or DOWN buttons
so that
“Function”
is highlighted, then press ENTER. This function is used with
DMX mode.
2.
Press the LEFT or RIGHT buttons until
“Status”
is displayed, press ENTER.
3.
Press LEFT or RIGHT buttons, until
“Pan Invert”
is displayed, and press ENTER.
4. Either
“Off”
or
“On”
will be displayed, use the LEFT or RIGHT buttons to toggle
between.
5. Press ENTER to confirm your selection or press MODE to exit.
