ADJ Products, LLC - www.adj.com - Vizi Hex Wash7 Instruction Manual
Page
36
Vizi Hex Wash7
System Menu
Dim Curve
- With this function you can change dimmer curve setting for LED. See page
46 for the Dimmer Curve Chart.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons
so that
“Function”
is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until
“Dim Curve”
is displayed, press ENTER.
3. The current dimmer curve setting will now be displayed.
4. Use the LEFT or RIGHT buttons to find your desired dimmer curve setting.
5. Press ENTER to confirm your selection or press MODE to exit.
Temperature C/F
Temperature C/F
-
With this function, you can change the temperature display to show
either Celsius or Fahrenheit.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons
so that
“Function”
is highlighted, then press ENTER.
2. Press LEFT or RIGHT buttons, until
“Temp. C/F”
is displayed, and press ENTER.
3. Either
“Celsius”
or
“Fahrenheit”
will be displayed, use the LEFT or RIGHT buttons
to toggle between.
4. Press ENTER to confirm your selection or press MODE to exit.
Init.Effect
Init.Effect -
In this menu you are able to check the initial effect position.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons
so that
“Function”
is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until
“Init.Effect”
is displayed, press ENTER.
3. “XXX” will be displayed. “XXX” represents the current effect position.
4. Press ENTER or press MODE to exit.
