ADJ Products, LLC - www.adj.com - Vizi Hex Wash7 Instruction Manual
Page
38
Vizi Hex Wash7
System Menu
Auto. Pro -
This function allows the internal programs to run in either stand alone or
Primary/Secondary mode. In “Primary” mode the fixture will send DMX data to other
fixtures connect via the DMX chain. In “Alone” mode the fixture will operate as a single
fixture. The program for this mode is selected in the “Select program” section of the
control menu. You can set the number of steps under “Edit program”. You can edit the
individual scenes under “Edit scenes”. With
this function, you can run the individual scenes either automatically, i.e. with the adjusted
Step-Time.
1. Access the main menu, and press the UP or DOWN buttons so that “
Function
” is
highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “
Auto. Pro
” is displayed, and press ENTER.
3. Either “Primary” or “Alone” will be displayed. Use the LEFT or RIGHT buttons to find
your desired setting.
4. Press ENTER to to make your selection, or press MODE button to exit.
DFSE
DFSE
- With this function you can restore the factory settings.
1. Access the main menu, and press the UP or DOWN buttons so that “
Function
” is
highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons so that
“DFSE”
is highlighted, then press
ENTER.
3. Either
“Off”
or
“On”
will be displayed, use the LEFT or RIGHT buttons to toggle
between. Selecting
“On”
will restore the factory settings.
4. Press ENTER to confirm your selection or press MODE to exit.
