ADJ Products, LLC - www.adj.com - Illusion Dotz 3.3 Instruction Manual Page 12
ADJ Products, LLC - www.adj.com - Illusion Dotz 3.3 Instruction Manual Page 13
Illusion Dotz 3.3
System Menu
Function
Status
Remote Add
No DMX Status
Pan Invert
Tilt Invert
Pan Degree
Feedback
Move.Spd
Mic.Sens
Stand By
ON/OFF
Blackout/Hold/Auto/Sound
ON/OFF
ON/OFF
630/540
ON/OFF
Speed 1~ 4
0~99%
OFF, 01M~99M 15M
Add. via DMX
Auto run if no DMX
Pan Reverse movement
Tilt Reverse movement
Pan Degree Select
Movement Feedback switch
Movement Mode Select
Sensitivity of Mic.
Stand By Mode
Fixture ID
Service PIN
RDM PID
Device IP Addr
Ctrl IP Addr
Universe
Password=XXX
Xxxxxx
Xxx.xxx.xxx.xxx
Xxx.xxx.xxx.xxx
xxx
Service Code =050
RDM Unique PID setting
Set the Device IP address
Set the Console IP address
Port number
Protocol Set
Kling-Net
(Default Kling-Net)
ArtNet
Net Switch
ON/OFF
Ethernet Switch
Fan Set
Head Fan
Auto
High
Low
Fans Speed Mode Select
Base Fan
50%
75%
95%
LCD.Set
Backlight
Flip Display
Key Lock
DispFlash
02~60m 05m
ON/OFF
ON/OFF
ON/OFF
Display shutoff time
Display Flip 180
Key Lock
Display flashes when NoSignal
Dim Curve
Standard, Stage, TV, Architectural, Theater
Temp. C/F
Celsius
Fahrenheit
Temperature switch
between
/
Init.Effect
PAN =XXX
Initial effect position
Disp.Set
Chan.Value
Slave Set
Auto.Pro
Sound.Ctrl
PAN……
Slave1,Slave2,Slave3
Master / Alone
Master / Alone
Value of channel is displayed
Slave receive location choice
Auto program
Music control
DFSE
ON/OFF
Restore factory set
Information
Time.Info
Current
Total Time
Last Clear
Timer PIN
Clear Last
Power on running time (Hours)
Fixture running time (Hours)
Fixture Last times clear (Hours)
Timer
Password
Password=050
ON/OFF
Temp. Info
Head Temp.
Temperature in the head
Error. Info
Pan,Tilt…..
Reset the error message
Model. Info
XXXX
Lamps Model Information
Software.V
1U01 V1.00……
2U01 V1.00……
Software version information of
each IC
Receive
Set Address
A001~AXXX
DMX address setting
User Mode
User Mode
Standard
Basic
Extend
User A
User B
User C
User’s mode to change channel
numbers
Edit A
Edit B
Edit C
Max Channel
PAN
:
Preset User modes
Test
Reset.M
Pan&Tilt
Reset Pan/Tilt
Test.Chan
PAN ……
Test function
Panel.Ctrl.
PAN =XXX
:
Adjustment of the lamp
Calibrate
-Password-
PAN
:
Calbrate and adjust the effects to
standard position
Password “050”
Program
Select .Pro
Pro. Part 1 = Program 1 ~ 9 Program 1
Pro. Part 2 = Program 1 ~ 9 Program 2
Pro. Part 3 = Program 1 ~ 9 Program 3
Select programs to be run
Edit. Pro
Program 1
:
Program 9
Program Test
Step 01=SCxxx
Step 64=SCxxx
Testing program
Program in loop
Save and exit
Edit.Sce
Edit Scene 001
~ Edit Scene 250
Pan,Tilt,……
Fade Time
Secne Time
Input By Outside
Manually enter the scene
Fade Time
Secne Time
External console scene input
Sce.Input
XX~XX
Automatic recording scene
Illusion Dotz 3.3
System Menu
The main menu is accessed by pressing the MODE button. Browse
through the menu by using the UP, DOWN, RIGHT, & LEFT buttons.
Press the ENTER button to access the desired menu. You can scroll
through the submenus using the UP, DOWN, RIGHT, & LEFT buttons.
To confirm every selection press the ENTER button. You can exit
every menu and submenu by pressing the MODE button. The unit will
automatically exit the menus if no buttons are pressed after 10 sec-
onds. These next pages will explain each function in the menu layout
located on the previous page.
RECEIVE
SET ADDRESS - With this function, you can adjust the desired DMX-
address via the Control Board.
1. Access the main menu, and press the UP or DOWN buttons so
that “Receive” is higlighted, then press ENTER.
2. “Set Address” will be displayed, press ENTER. The current DMX
address will now be displayed.
3. Use the UP or DOWN buttons to adjust the DMX address.
4. Press ENTER to confirm or press MODE to return to the main
menu.
USER MODE
USER MODE -
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that “User Mode” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “User Mode” is displayed,
press ENTER.
3. Use the UP or DOWN buttons to scroll through the 3 DMX Channel
Modes.
Standard Mode - This is 14 Channel Mode.
Basic Mode - This is 12 Channel Mode.
Extended Mode - This is 38 Channel Mode.
4. Press the MODE button once to return to the “User Mode” menu.
