ADJ ILLUSION DOTZ 3.3, Инструкция пользователя

Страница: 23 / 24

ADJ Products, LLC - www.adj.com - Illusion Dotz 3.3 Instruction Manual Page 44 ADJ Products, LLC - www.adj.com - Illusion Dotz 3.3 Instruction Manual Page 45
Illusion Dotz 3.3 Photometric Chart
(Fade Time) (Fade Time)
Ramp Effect
Standard
Stage
TV
Architectural
Theatre
Illusion Dotz 3.3 Dimmer Curve Chart
0
0 1 2 3 4 5
1
1
2
2
3
Beam opening(m)
3
10
0.75 0.40 1.10 1.50 1.75
Beam angle 10°
10° Diameter(m)
Intensity(LUX)
Red LEDs
Green LEDs
Blue LEDs
Full LEDs 6680
8340
11920
22900
2700
3140
4400
9280 1430
1680
2300
4600 730
1100
1450
2810
483
593
829
1920
Illusion Dotz 3.3 Cleaning
Illusion Dotz 3.3 Trouble Shooting
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on
the bottom panel of the unit.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning
the internal and external optical lenses and mirror should be carried
out periodically to optimize light output. Cleaning frequency depends
on the environment in which the fixture operates (I.e. smoke, fog
residue, dust, dew). In heavy club use we recommend cleaning on a
monthly basis. Periodic cleaning will ensure longevity, and crisp out-
put.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Fuse Replacement: Locate and remove the unit’s power cord. Once
the cord has been removed located the fuse holder located inside the
power socket. Insert a flat-head screw driver into the power socket
and gently pry out the fuse holder. Remove the bad fuse and replace
with a new one. The fuse holder has a built-in socket for a spare fuse
be sure not to confuse the spare fuse with active fuse.
Illusion Dotz 3.3 Fuse Replacement