ADJ ILLUSION DOTZ 3.3 Скачать руководство пользователя

Страница: 11 / 24

ADJ Products, LLC - www.adj.com - Illusion Dotz 3.3 Instruction Manual Page 20

ADJ Products, LLC - www.adj.com - Illusion Dotz 3.3 Instruction Manual Page 21

Illusion Dotz 3.3

System Menu

Protocol Set
KLING-NET/ARTNET - With this function you can select the soft-

ware for which you are going to control the fixture.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Protocol Set” is displayed,

press ENTER.
3. Either “Kling-Net” or “ArtNet” will be displayed. Use the UP

or DOWN buttons, to find the software you wish to use, and press

ENTER to select.
4. Press the MODE button to exit.

Net Switch
NET SWITCH - This function will activate the unit to receive Kling-

Net/ArtNet signal.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Net Switch” is displayed,

press ENTER.
3. Either “On” or “Off” will be displayed. To activate the Net Switch

use the UP or DOWN buttons to select “On”, and press ENTER to

select.
4. Press the MODE button to exit.

Fan Set
HEAD FAN - With this function you can adjust the speed of the

moving head fans.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Head Fan” is displayed,

press ENTER.
3. Either “Auto Fan Speed” (default), “Low Fan Speed”, or “High

Fand Speed” will be displayed, use the UP and DOWN buttons to

Illusion Dotz 3.3

System Menu

toggle between.
4. Press ENTER to confirm your selection or press MODE to exit.

BASE FAN - With this function you can adjust the speed of the base

fans.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Base Fan” is displayed,

press ENTER.
3. Either “Auto Fan Speed” (default), “Low Fan Speed”, or “High

Fand Speed” will be displayed, use the UP and DOWN buttons to

toggle between.
4. Press ENTER to confirm your selection or press MODE to exit.

LCD Setting
BACKLIGHT - With this function you can have the LCD display after

2-60 minutes. Use this function to adjust the time.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “LCD Set” is displayed, press

ENTER.
3. Press UP or DOWN buttons, until “Backlight” is displayed, and

press ENTER.
4. “05m” (5 minutes) will be displayed, use the UP and DOWN but-

tons to adjust the shutoff time between 02m-60m or “Off”.
5. Press ENTER to confirm your selection or press MODE to exit.

FLIP DISPLAY - With this function you can rotate (flip) the display

180 degrees.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “LCD Set” is displayed, press

ENTER.

Содержание ILLUSION DOTZ 3.3

























Результаты поиска

Содержание ILLUSION DOTZ 3.3

Отзывы:

Похожие инструкции для ILLUSION DOTZ 3.3

Бренды по названию

Популярные бренды

ADJ ILLUSION DOTZ 3.3, Инструкция пользователя

Результаты поиска

Содержание ILLUSION DOTZ 3.3

Отзывы:

Похожие инструкции для ILLUSION DOTZ 3.3

Бренды по названию

Популярные бренды