ADJ ILLUSION DOTZ 3.3 Скачать руководство пользователя

Страница: 10 / 24

ADJ Products, LLC - www.adj.com - Illusion Dotz 3.3 Instruction Manual Page 19

ADJ Products, LLC - www.adj.com - Illusion Dotz 3.3 Instruction Manual Page 18

Illusion Dotz 3.3

System Menu

4. “15M” will be displayed, use the UP and DOWN buttons to adjust

the hibernation period between 01M-99M or “Off”.
5. Press ENTER to confirm your selection or press MODE to exit.

Fixture ID
SERVICE PIN - With this function you can enter the RDM password

so that you can access and change the RDM ID number.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Fixture ID” is displayed,

press ENTER.
3. Press UP or DOWN buttons, until “Service PIN” is displayed, and

press ENTER.
4. The “Password” is 050.
5. Press ENTER or press MODE to exit.

RDM PID - RDM stands for “Remote Device Management”. This

feature lets you control every aspect of your fixture remotely from an

RDM controller. Manual settings like adjusting the DMX address are

no longer needed. This is especially useful when the unit is installed

in a remote area.

In this submenu you can see the units RDM ID number and adjust it

as well.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Fixture ID” is displayed,

press ENTER.
3. Press UP or DOWN buttons, until “RDM PID” is displayed, and

press ENTER.
4. “XXXXXX” will be displayed. “XXXXXX” represents the units current

RDM ID.
5. Press ENTER or press MODE to exit.

Illusion Dotz 3.3

System Menu

DEVICE IP ADDR - With this function you set the Device IP address.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.

2. Press the UP or DOWN buttons until “Fixture ID” is displayed,

press ENTER.
3. Press UP or DOWN buttons, until “Device IP Addr” is displayed,

and press ENTER.
4. “XXX XXX XXX XXX” will be displayed. “XXX XXX XXX XXX” repre-

sents the units current Device IP Address.
5. Press ENTER or press MODE to exit.

CTRL IP ADDR - With this function you set the Console IP address.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Fixture ID” is displayed,

press ENTER.
3. Press UP or DOWN buttons, until “Ctrl IP Addr” is displayed, and

press ENTER.
4. “XXX XXX XXX XXX” will be displayed. “XXX XXX XXX XXX” repre-

sents the units current Device IP Address.
5. Press ENTER or press MODE to exit.

UNIVERSE - With this function you can enter the port number.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Fixture ID” is displayed,

press ENTER.
3. Press UP or DOWN buttons, until “Universe” is displayed, and

press ENTER.
4. “XXX” will be displayed. “XXX” represents the units current Device

IP Address.
5. Press ENTER or press MODE to exit.

Содержание ILLUSION DOTZ 3.3

























Результаты поиска

Содержание ILLUSION DOTZ 3.3

Отзывы:

Похожие инструкции для ILLUSION DOTZ 3.3

Бренды по названию

Популярные бренды

ADJ ILLUSION DOTZ 3.3, Инструкция пользователя

Результаты поиска

Содержание ILLUSION DOTZ 3.3

Отзывы:

Похожие инструкции для ILLUSION DOTZ 3.3

Бренды по названию

Популярные бренды