6/6
B 100
Safety instructions for pump and
controller installation
GB 00731 - Edition 14 - Sept. 12
This label indicates that handling the pump can cause muscle strain or
back injury.
For all product handling, use the appropriate handling devices.
This label warns the user against possible risk of injury due to any hand
contact with hot surfaces.
It states that protective gloves should be used before performing any
intervention.
Labels stuck
on the product
This label indicates that some of the internal parts are energized and
could cause electrical shocks in case of contact. It advises to disconnect
the pump before any intervention or to properly lock-out and tag-out
the equipment breaker before any intervention on the pump.
Other labels
Customer is in charge to stick these labels on the ATHM on the most
appropriate location to warn the operator regarding the probable
hazards.
This label informs the user that moving parts present inside the pump
coud cause personal injury, like crushing
or cutting. The user must keep all body parts away from moving
parts.
MOVING PARTS PRESENT
Moving parts can crush and cut.
Keep hands or feet away from moving parts.
WARNING
The «hot surface» sticker must be sticked conspicuously on the pump
housing.
The user must label visibly the product to warn against
pumped process gas that could be dangerous and toxic and
could cause severe injuries or death. It precises that any
preventive maintenance operation can only be performed by
trained personnel.
FLAMMABLE, CORROSIVE AND TOXIC
CHEMICALS LOCATED WHITHIN THE ENCLOSURE
Explosure may result in severe injury
or death.
Preventive maintenance must be done
by trained personnel only.
WARNING
Avoid causing a shock on a pump when the rotor is moving, it can block
the right operation.
LOCK
This label means that you must lock the electrical connector before using
the pump and during operation.
adixen Vacuum Products - Operating instructions - ATH 2300 M/MT
