Owner’s Guide
30
The Rear Panel
The rear panel of the Instrument Interface is shown below (Figure 6-3).It provides the
USB-C Port for connection to the PowerLab C or computer.
Connecting an Analog Instrument into a system
An Analog Instrument can be connected using the Instrument Interface in the following
ways:
1.
Through a PowerLab C: The Analog instrument can be connected to the
Instrument Interface by using the BNC sockets on the front panel. Using the
USB-C to USB-C cable, the Instrument Interface can be powered by connecting
it to one of the 4 downstream facing USB ports on the PowerLab C. A USB-C to
USB-C cable or USB-C to USB-A cable should be used to connect the PowerLab
(using the ‘Computer’ labelled upstream facing port) to the appropriate USB
port on the computer .
Figure 6–3
The rear panel
of the
Instrument
Interface
USB-C
Port
To Computer
Figure 6–4
Connecting an
instrument to
the system using
a PowerLab C
