Owner’s Guide
31
2.
Directly to the Computer: Aft er connecting the Analog instrument and the
Instrument Interface through the BNC sockets on the front panel, the Interface
can be powered by directly connecting it to a computer. In this case, an
ADInstruments supplied USB-C to USB-C cable or USB-C to USB-A cable can be
used depending on port availability on the computer.
Supplied Accessories
Accessory
MLAC89/1 USB-C to USB-C cable (300mm)
MLAC89/3 USB-C to USB-C cable (1m)
Soft ware
LabChart 8:
Instrument Interface devices will be detected and listed during LabChart 8’s device
detection process. Channels can be enabled in the ‘Devices and Channels’ dialogue
in the ‘Setup’ menu. Settings for the Instrument Interface can be found in the Input
Amplifier section of the channel drop down menu.
LabChart Lightning:
Instrument Interface devices will be detected during LabChart Lightning’s device
detection process.
To
Computer
Figure 6–5
Connecting an
instrument to a
computer
