AD1000 User’s Manual
- 55 -
In {event} options, there are various parameters of events listing, including event
type, number, position, insert loss, reflection loss, attenuation and accumulation and
etc.
When switch to {event}, application program will display a marker on the tracing
graph.
When some event in event list is selected, the marker will move to that event position
and indicate.
When open multi traces, event options only display current trace.
Markers Options
When switch to {Markers} options, application program display two Markers A and B,
or include some gauge points. Particular cases depend on the function button in the
button area.
Move these Markers along the trace to calculate loss, attenuation, reflection and etc.
Can use the buttons in Markers area to relocate all Markers and also can drag them
in trace display window. Can use spinning hand wheel move the Markers accurately.
11.5 Switch and move Markers
There are many ways can switch and move Markers, users can choose one from
them or use them in combination way to increase efficiency
Ø
In trace displaying area, use stylus or mouse select A/B Markers or label
above Markers, then can press and drag A/B tracing
Ø
In the buttons area on the bottom of surface, click [
] or [
] to switch
between A,B
Ø
Press down the spinning hand wheel on the front panel will switch the
Markers or mark the point
Ø
After select Markers, continuously click [
] or [
] to move Markers.
Ø
Can use the spinning hand wheel on the front panel to move the Markers
accurately.
Ø
After select marked point, click [
], [
], towards left or right to move the
Markers.
