ADInstruments AD1000 Скачать руководство пользователя страница 3

Страница: 3 / 103

AD1000 User’s Manual

- 3 -

GENERAL

This product is a Safety Class 3 instrument. The protective features of this product

may be impaired if it is used in a manner not specified in the operation instrument.

Environmental Conditions

It is designed to operate at a maximum relative humidity of 95% and at altitudes of

up to 2000 meters. Refer to the specifications tables.

Before Applying Power

Verify that the product is set to match the available line voltage, the correct fuse is

installed, and all safety precautions are taken. Note AD1000’s external markings

described under Symbols.

Do Not Operate in an Explosive Atmosphere

Do not operate AD1000 in the presence of flammable gases or fumes.

Do Not Remove AD1000 Cover

Operating personnel must not remove instrument covers. Component replacement

and internal adjustments must be made only by qualified service personnel.

Instrument that appears damaged or defective should be made inoperative and

secured against unintended operation until they can be repaired by qualified service

personnel.

Safety Terms Used in This Manual

The

WARNING

sign denotes a hazard. It calls attention to a

procedure, practice, or the like, which, if not correctly performed

or adhered to, could result in personnel injury. Do not proceed

beyond a WARNING sign until the indicated conditions are fully

understood and met.

The

CAUTION

sign denotes a hazard. It calls attention to an

Содержание AD1000








































































































Результаты поиска

Содержание AD1000

Отзывы:

Бренды по названию

Популярные бренды

ADInstruments AD1000, Руководство пользователя

Результаты поиска

Содержание AD1000

Отзывы:

Бренды по названию

Популярные бренды