ADInstruments AD1000 Скачать руководство пользователя страница 41

Страница: 41 / 103

AD1000 User’s Manual

- 41 -

u

The file name in auto naming mode consists of:

WavNumber, the number will increase automatically when

user save traces.

u

If the name of the file to be saved already exists, system will promote a

warning message.

7.6 Open Saved Trace

Click [

] button on the right lower corner in OTDR interface to open saved trace

In single trace display mode, when opening a new trace, the

currently-displayed trace will be closed.

In Multi-trace display mode, user can open and display upto four traces at

the same time.

u

Enable/disable Multi-trace display mode in OTDR Setup by

checking/unchecking “Multi-trace” in Display Option.

u

User can open and view “.jpg” format trace though “File Explorer” on

{Program} label in AD1000 main interface. “.jpg” format trace can be also

loaded to PC for viewing.

7.7 Trace Viewing and Analysis Operation

User can zoom in/out trace, utilizing markers and marking points for trace

characterization including loss, attenuation, reflection and etc.

Zoom in/out trace:

Ø

In trace display area, draw selection frame from left upper corner to right

lower corner to zoom in trace.

Ø

Draw selection frame from right lower corner to left upper corner to zoom

out trace.

Содержание AD1000








































































































Результаты поиска

Содержание AD1000

Отзывы:

Бренды по названию

Популярные бренды

ADInstruments AD1000, Руководство пользователя

Результаты поиска

Содержание AD1000

Отзывы:

Бренды по названию

Популярные бренды