AD1000 User’s Manual
- 38 -
Fig 7.1 OTDR Trace Acquisition Interface
u
During testing, the averaging trace shows in the trace display area and
refresh at certain intervals, the trace after testing finishes is the final trace.
u
User can stop testing any time, application will show all the information
when test stops.
u
After test is finished or interrupted by user, system will perform automatic
analysis which takes about 5 seconds or longer before user can start a new
test.
u
In Averaging mode, the interface will show the remaining time of the test.
u
In Real-time mode, test will keep going until user stops it.
7.2 Trace Processing
After test and automatic analysis is complete, event types will be displayed below
the trace area; user can review all events information in events list which is on
{Events} label. User can also save traces, open saved traces to review and start new
test after trace acquisition.
Application will promote user to save unsaved trace before starting
