Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFIBUS Master
/ MQTT
Document code: MN67950_ENG Revision 1.000 Page 21 of 36
M
ODULE
S
ELECTION
:
The section “Module Selection” is used to select
which Modules are present in the Slave (Fig. 7).
In this section is possible to:
Check the list of the Modules selected
(“Select Modules”) (Fig. 7, point (1)) and
the list of Modules Available in GSD file
(“Available Modules") (Fig. 7, point (7));
Add a Module from the list of GSD file (Fig.
7, point (6));
Remove a Module from selected list (Fig.
7, point (5));
Add all Modules present in the GSD file
(Fig. 7, point (4));
Remove all Modules from selected list (Fig.
7, point (3));
Insert a Module not present in the GSD file
(“
Manual Module
”) (Fig. 7 point (2)). For
more info see the section “Manual Module”
below.
Figure 7: “PROFIBUS Device – Module Selection”
window
