Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFIBUS Master
/ MQTT
Document code: MN67950_ENG Revision 1.000 Page 24 of 36
By pressing the “
Modify User Parameters Manually
” button from the “PROFIBUS Device” window (Fig. 6) the “Add Module Manually”
window appears (Fig. 10).
In this window is possible to add/modify the User and/or Modules Parameters manually, i.e. writing the configuration of the parameters (in
hexadecimal).
The means of the fields are:
In the field “
Insert the number of User Parameter
” the number
of byte for the parameter have to be inserted;
In the field “
Insert the Configuration of Module (HEX)
” the
configuration of the User and/or Modules Parameters is defined. The
configuration must be write in hexadecimal mode (without prefix
“0x” o “$”).
Note:
The Values inserted in the table must between 00 and FF.
Figure 10: “Add/Modify User Parameters Manually” window
