ADF Web HD67302-B2 Series, Руководство пользователя

Страница: 19 / 20

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual GSM I/O and Alarms Modem
Document code: MN67302_ENG Revision 1.001 Page 19 of 35
C
ALL
By pressing the field “ CALL ” it is possible to enable the
function of change the state of output using a Phone Call.
There are three types of operations:
“ Automatic hang Up after Hang Up Risings
Number ”, used for hang up after the numbers of
rings expressed in the field “ Hang Up Rings ”;
“ Under Ring Number ”, used for trigger an event if
the number of rings is under the value expressed in
the field “
Ring Number ”;
“ Above Ring Number ”, used for trigger an event if
the number of rings is above the value expressed in
the field “
Ring Number ”.
For all operations, there are the three possibilities like the
use of SMS, i.e.:
“ Set output ”, used for close the relay contact;
“ Reset output ”, used for open the relay contact;
“ Impulse output ”, used for make an impulse with a
defined duration. The duration of the impulse is
defined with the field “
Pulse duration ………
Milliseconds ”.
In the table it is possible to insert the various ‘Phone Numbers’ and for each Number give a ‘Profile’.
The possible ‘Profile’ are the same described in the subsection ‘SMS’ of section ‘OUTPUT SETTING’.
Figure 11: “Output Setting CALL” window