Adeunis RF MOTION V2, Техническое справочное руководство

Страница: 14 / 15

Date: 02/12/2019 Page 14 / 15
adeunis
®
Manage & optimize your assets & services
283, rue louis Néel 38920 CROLLES, France
Tél : +33 (0)4 76 92 07 77 E-mail : sales@adeunis.com
www.adeunis.com
Decoding example:
Offset
(in byte) Data
Description
0 0x33 Frame code
1 0x80
Frame counter: 4
Bit1@0: LowBat not detected
2 0x04 invalid register
3-4 0x0020 32: register S032 does not exist (should be S3XX)
2.2.11 Transmit conditions
Frame
code
Description Sending conditions
0x10 Status (configuration)
•
Product start up
• Exit configuration mode (AT command)
•
Reception of frame 0x01 (get product
config)
0x1F Digital input
configuration
•
Product start up if at least one input is
activated
0x20 Network configuration
• Product start up
• Exit configuration mode (AT command)
•
Reception of frame 0x02 (get network
config)
0x30 Keep alive
•
Periodically if no periodical data is defined
0x5C Periodic data
•
Periodically
0x5D Presence alarm
•
Beginning or end of presence
0x50 Luminosity alarm
•
Threshold crossing
0x51
0x52
Digital input alarm
•
Threshold crossing
2.3 Downlink Frame format
2.3.1 Get applicative configuration (0x01)
Offset
(in byte) Data
Description
0 0x01 Frame code
When the device receives the downlink, it will generate a product configuration frame (0x10).
2.3.2 Get network configuration (0x02)
Offset
(in byte) Data
Description
0 0x02 Frame code
When the device receives the downlink, it will generate a network configuration frame (0x20).
2.3.1 Get registers (0x40)
This frame (0x40) allows you to inform the device through the network that it must send the values of specific S3XX
registers in an uplink frame (0x31).