Adeunis RF LoRaWAN US 902-928 Скачать руководство пользователя страница 4

Страница: 4 / 27

FIELD TEST DEVICE - LoRaWAN US 902-928 - Mode d'emploi V1.0.0

Page

of 27

INFORMATIONS

Document Information
Title

FIELD TEST DEVICE

Subtitle

LoRaWAN US 902-928

Document type

User Guide

Version

V1.0.0

This document applies to the following products:

Name

Reference

Firmware Version

FIELD TEST DEVICE - LoRaWAN US 902-928

ARF8124A

Version RTU: V01.07.01
Version APP: V01.01.02

DISCLAIMER

This document and the use of any information contained therein, is subject to the acceptance of the adeunis®

terms and conditions. They can be downloaded from www.adeunis.com.

adeunis® makes no warranties based on the accuracy or completeness of the contents of this document and

reserves the right to make changes to speciﬁ cations and product descriptions at any time without notice.

adeunis® reserves all rights to this document and the information contained herein. Reproduction, use or disclo-

adeunis® is a registered trademark in the EU and other countries.

TECHNICAL SUPPORT

Website

Our website contains a lot of useful information: information on modules and wireless modems, user guides, and

conﬁ guration software and technical documents which can be accessed 24 hours a day.

E-mail

If you have technical problems or cannot ﬁ nd the required information in the provided documents, contact our

Technical Support on our website, section « Technical Support ». This ensures that your request will be processed

as soon as possible.

Helpful Information when Contacting Technical Support

When contacting Technical Support, please have the following information ready:

•

Product type

•

Firmware version (for example V1.0)

•

A clear description of your question or the problem

•

A short description of the application

Содержание LoRaWAN US 902-928




























Результаты поиска

Содержание LoRaWAN US 902-928

Отзывы:

Похожие инструкции для LoRaWAN US 902-928

Бренды по названию

Популярные бренды

Adeunis RF LoRaWAN US 902-928, Руководство пользователя

Результаты поиска

Содержание LoRaWAN US 902-928

Отзывы:

Похожие инструкции для LoRaWAN US 902-928

Бренды по названию

Популярные бренды