Adeunis RF LoRaWAN US 902-928 Скачать руководство пользователя страница 3

Страница: 3 / 27

FIELD TEST DEVICE - LoRaWAN US 902-928 - Mode d'emploi V1.0.0

Page

of 27

Préambule / Preamble / Präambel / Preambolo / Preámbulo

• Ce guide décrit les fonctionnalités du produit adeunis®. Il explique les modes de fonctionnement du produit et

la manière de le conﬁ gurer.

• This guide describes the functionalities of the product adeunis®. It explains its functionnments and how to

conﬁ gure it.

• Dieser Leitfaden beschreibt die Funktionalität des Produktes adeunis®. Er erklärt die Betriebsfunktionen des

Produktes und die Art und Weise, um es zu konﬁ gurieren.

• Questa guida descrive la funzionalità del prodotto adeunis®. Questo spiega come funziona il prodotto e come

conﬁ gurarlo.

• Esta guía describe las funcionalidades del producto adeunis®. En él se explica los modos de funcionamiento

del producto y cómo conﬁ gurarlo.

• Aucun extrait de ce document ne pourra être reproduit ou transmis (sous format électronique ou papier, ou

par photocopie) sans l’accord d’adeunis®. Ce document pourra être modiﬁ é sans préavis. Toutes les marques

citées dans ce guide font l’objet d’un droit de propriété intellectuelle.

• No part of this document may be reproduced or transmitted (in electronic or paper, or photocopying) without

the agreement adeunis®. This document may be changed without notice. All trademarks mentioned in this

guide are the subject of intellectual property rights. adeunis®.

• Kein Teil dieses Dokuments darf reproduziert oder übertragen werden (in elektronischer oder Papierform oder

Fotokopie) ohne die Zustimmung adeunis®. Dieses Dokument darf ohne vorherige Ankündigung geändert wer-

den. Alle Marken in diesem Handbuch erwähnt werden, sind Gegenstand des geistigen Eigentums.

• Nessuna parte di questo documento può essere riprodotta o trasmessa (in fotocopie elettronico o cartaceo, o),

senza il consenso adeunis®. Questo documento può essere modiﬁ cato senza preavviso. Tutti i marchi citati in

questa guida sono oggetto di diritti di proprietà intellettuale.

• Ninguna parte de este documento puede ser reproducida o transmitida (en fotocopias electrónico o en papel,

o) sin el acuerdo adeunis®. Este documento puede ser modiﬁ cada sin previo aviso. Todas las marcas comer-

ciales mencionadas en esta guía son el tema de los derechos de propiedad intelectual.

Adeunis

283, rue Louis Néel

38920 Crolles

France

Web

www.adeunis.com

Содержание LoRaWAN US 902-928




























Результаты поиска

Содержание LoRaWAN US 902-928

Отзывы:

Похожие инструкции для LoRaWAN US 902-928

Бренды по названию

Популярные бренды

Adeunis RF LoRaWAN US 902-928, Руководство пользователя

Результаты поиска

Содержание LoRaWAN US 902-928

Отзывы:

Похожие инструкции для LoRaWAN US 902-928

Бренды по названию

Популярные бренды