FR
W-MBus Modems/Receiver/Repeater - Guide utilisateur / User guide version V1.8.2
34
Page
of of 50
EN
Any electrical connection of the product must be equipped with a protection device against voltage spikes and short-circuits.
Recommendations regarding use
• Before using the system, check that the power supply voltage shown in the user manual corresponds to your supply. If it doesn’t, please
consult your supplier.
• Place the device against a flat, firm and stable surface.
• The device must be installed in a location that is sufficiently ventilated so that there is no risk of internal heating and it must not be cove-
red with objects such as newspapers, cloths, curtains, etc.
• The device’s aerial must be free and at least 10 cm away from any conducting material.
• The device must never be exposed to heat sources such as heating equipment.
• Do not place the device close to objects with naked flames such as lit candles, blowtorches, etc.
• The device must not be exposed to aggressive chemical agents or solvents likely to damage the plastic or corrode the metal parts.
• Install your device close to its DC power supply.
• Avoid electrical and RS232 extension cables over 3 metres in length.
Disposal of waste by users in private households within the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed off with
your other household waste. Instead, it is your responsibility to dispose of your waste by taking it to
a collection point designated for the recycling of electrical and electronic appliances. Separate collection and recycling of your waste
at the time of disposal will contribute to conserving natural resources and guarantee recycling that respects the environment and human health.
For further information concerning your nearest recycling centre, please contact your nearest local authority/town hall offices, your household
waste collection company or the shop where you bought the product.
