FR
W-MBus Modems/Receiver/Repeater- Guide utilisateur / User guide version V1.8.2
33
Page
of of 50
EN
Environmental recommendations
All superfluous packaging materials have been eliminated. We have done everything possible to make it easy to separate the packaging into
three types of materials: cardboard (box), expanded polystyrene (filler material) and polyethylene (packets, foam protective sheets). Your device
is composed of materials that can be recycled and reused if it is dismantled by a specialist company. Please observe local regulations concerning
the manner in which waste packaging material, used batteries and your obsolete equipment are disposed of.
Warnings
Valid for Wireless M-Bus module with the following references: ARF7883Ax, ARF7904Ax, ARF7906Ax, ARF7922x, ARF7923x, ARF7924x
Read the instructions in the manual.
The safety of this product is only guaranteed when it is used in accordance with its purpose.
Maintenance should only be carried out by qualified persons.
Please note,
do not install the equipment close to a heat source or in damp conditions.
Please note,
when the equipment is open, do not carry out any operations other than those specified in these instructions.
Only use this equipment inside a building and at a maximum height of 2000 m above sea level.
Please note:
do not open the product as there is a risk of electric shock.
Please note:
for your own safety, you must ensure that the equipment is switched off before carrying out any work on it.
Please note:
For your safety, the power supply circuit must be SELV (Safety Extra Low Voltage) and must be a limited power sources.
(Conform to chapter 2.5 of the 60950-1 standard)
Please note:
when the aerial is installed outside, it is essential to connect the cable screen to the
building’s earth. We recommend using lightning protection. The protection kit chosen must permit the coaxial cable to be earthed
(eg: coaxial lightning arrester with earthing of the cable at different places on the aerial at the base of pylons and at the entry, or just before
entering the premises).
The product must be equipped with a switching mechanism so that the power can be cut. This must be close to the equipment.
For repeater ARF7923AA (mains version), the disconnect device in case of a problem is the AC / DC adapter, it must be easily accessible.
INTRODUCTION
All rights to this manual are the exclusive property of adeunis®. All rights reserved. Copying this manual (wit-
hout written permission from the owner) via printing, copying, recording or by any other means, translating this
manual (in full or partially) into any other language, including all programming languages, using any electrical,
mechanical, magnetic or optical devices, manually or any by other methods, is prohibited.
adeunis® reserves the right to change the technical specifi cations or functions of its products, or to cease manu-
facturing any of its products, or to cease technical support for one of its products without notice in writing and
urges its customers to make sure that the information they have is valid.
adeunis® confi guration software and programs are available free of charge in a non-modifi able version. adeu-
nis® can make no guarantees, including guarantees concerning suitability and applicability for a certain type
of application. Under no circumstances can the manufacturer, or the distributor of an adeunis® program, be
held liable for any damage caused by the use of the aforesaid program. Program names, as well as all copyright
relating to programs, are the exclusive property of adeunis®. Any transfer, granting of licences to a third party,
leasing, hire, transport, copying, editing, translation, modifi cation into another programming language or reverse
engineering are prohibited without adeunis®’s prior written authorisation and consent.
Adeunis
283, rue Louis Néel
38920 Crolles
France
Web
www.adeunis.com
