ADENDORFF ML392CI, Руководство по обслуживанию

Страница: 2 / 21

1
CAUTION
1 To adjust and maintain after stopping the machine and take the plug off the socket.
2 Fix the milling hood when carriage, surface planing, press planing, sawing and storage (see
below Fig).
3 To mount the protective device during the milling operation.
4 To dismount sawblade if you have to operate the press planing, milling and drill for a long
time.
5 Max. diameter of milling cutter is less than 104mm.
6 Let the milling feeding presser (used as anti-kickback jaw) and the outfeed presser press the
workpiece dependably. The adjusted natural height should be lower than that of the level of
milling cutter.
milling hood