ADENDORFF ML392CI, Руководство по обслуживанию

Страница: 19 / 21

18
11 Maintenance & attendance
11.1General maintenance
●
Take the plug off the socket. Completely shut off the electric resource.
●
Clean the wood chips after work. Don't use iron brush on the anti-kickback jaws.
●
Lubricate rotate part every month, apply grease on chain, gear, nut and bushing with
hairbrush.
●
Cover the V-belt to avoid polluted by oil when maintenance.
●
When the table is not used for a long time, please brush the anticorrosive paint.
11.2 Special maintenance
●
This work should be operated by special man, including some accident.
●
Take the plug off the socket before operating, completely shut off the electric resource.
●
Check the V-belt, motor every 500 hours, Dismount the V-belt hood when check. If
something is wrong, please repair or change.
12 Major Standardization Products & Fragile Parts
Name Specifications Amount Mount position
Radial ball bearing 80204 2 Planing arbor
Radial ball bearing 60203 4 Thickness feed drive
V-belt A900 1 Thickness feed drive
V-belt A800 2 Plane drive
Planer tool 210
×
30
×
3 3 Planing arbor
Saw blade 250
×
3
×
25. 1 Planing arbor
13 Tools to be used
The following tools are to be used during adjustment and maintenance.
Name Specification Name Specification
Flat head screw driver 100
×
6 75
×
4 Double ends solid wrench 14×17; 10×12
Crosshead screw driver 100
×
8 Monkey wrench 250
×
30
Allen key 5; 6; 8 Lead weigh 0.5kg