ADEMCO VISTA-128B, Руководство по установке и настройке, Страница: 145 / 208

Section 24 – Scheduling Options
24-11
Time-Driven Events Worksheet
Fill out the worksheet using the steps outlined below.
Sched Time Days Action Action Activation
Num. Window M T W T F S S H Desired Specifier Time
1
2
3…20
1) First enter the schedule number (01-20) and time window number (01-20), and
note the day of the week the action is desired.
2) Enter the code for the desired action and action specifier. The action codes are the
events that are to take place when the scheduled time is reached. Each action also
requires an action specifier, which defines what the action will affect (relay, relay group,
partition, zone list, user group). The action specifier varies, depending on the type of
action selected.
The following is a list of the "Action Codes” (desired actions) used when programming
time-driven events. Note that these codes are independent of the relay codes programmed
during the Output Programming in the #93 Menu Mode.
Relay commands
Action Code Action Specifier
01 Relay On Relay #
02 Relay Off Relay #
03 Relay Close for 2 seconds Relay #
04 Relay Close XX minutes (set in field 1*74) Relay #
05 Relay Close YY seconds (set in field 1*75) Relay #
06 Relay Group On Relay Group #
07 Relay Group Off Relay Group #
08 Relay Group Close for 2 seconds Relay Group #
09 Relay Group Close XX minutes (set in field 1*74) Relay Group #
10 Relay Group Close YY seconds (set in field 1*75) Relay Group #
Arm/Disarm Commands
Activation times 1 (Beginning), 2 (End), 3 (During) are the only valid choices for automatic
arming and disarming functions.
"During" can be used to arm and disarm the control for a specific time only. For example,
if "during" is selected with Arm-STAY, the system automatically Arms-STAY at the
beginning of the window and automatically disarms at the end of the window.
Action Code Action Specifier
20 Arm-STAY Partition(s)
21 Arm AWAY Partition(s)
22 Disarm Partition(s)
23 Force Arm STAY (Auto-bypass faulted zns) Partition(s)
24 Force Arm AWAY (Auto-bypass faulted zns) Partition(s)
•
The auto-arm warning (field 2*06) applies when using time-driven events to auto-arm.
•
Temporary schedules will not override an auto-arming or auto-disarming programmed in time-
driven events.
•
The auto-arming window cannot be extended using the Installer Code + #82 Mode.