17
STAN07-210324-Rev005-UM-en
The following diagram shows the procedure:
Basic setting of the audible signal [tYPE]
Press the
key when [bUZZEr] appears in the display. [tYPE] appears in the display.
For the basic setting of the audible signal, you have three options available:
N
No warning tone
B
Single warning tone for one second.
C
Continuous warning tone.
By means of the ▲ and ▼ keys, select the desired setting and confirm your choice with
to change
to the next menu item or press the
key to return to the previous menu item.
The following diagram shows the procedure:
Warning tone settings for tolerance weighings and tolerance counts [MOdE]
Press the
key twice when [bUZZEr] appears in the display. [ModE] appears in the display.
For the warning tone as an audible signal for tolerance weighing and counting, you have three options:
Ou
Warning tone when the weight is outside the limits.
In
Warning tone when the weight is within the limits.
Hı
Warning tone when the weight is above the maximum value (HI).
By means of the ▲ and ▼ keys, select the desired setting and confirm your choice with
to change
to the next menu item or press the
key to return to the previous menu item.
The following diagram shows the procedure:
Warning tone settings for the keypad [SoUn]
Press the
key three times when [bUZZEr] appears in the display. [SoUn] appears in the display.
If you press the keypad, the warning tone an be programmed so that it deletes the input or the sound is
switched off.
N
Keyboard - warning tone off.
Y
Keyboard - warning tone on.
By means of the ▲ and ▼ keys, select the desired setting and confirm your choice with
to change
to the next menu item or press the
key to return to the previous menu item.
