STAN07-210324-Rev005-UM-en
10
confirm it as a new reference quantity. As a further increase in the accuracy, you can now place 100
parts on the scale and confirm it as a reference quantity of the scale.
Each step optimizes the average piece weight, thereby increasing the accuracy in piece counting.
Piece counting without container
After the reference quantity is set, press
so that
appears in the display. Unless part weights
are stored in the indicator, you can also call up the average piece weight (APW) from the CLU memory.
Then place the number of parts to be weighed on the weighing platform.
The display shows the total number of pieces, e.g.
It is possible to add successive piece counts. To do this, press the
M+
key after each counting
procedure.
To return to the weighing mode, press the
key.
The last used APW is saved for the next piece count.
Counting pieces in a container
To perform piece counting in a container, place the empty container on the scale and tare using the
key. The display shows
and
appears.
If the auto tare function is enabled, pressing the
key is not necessary because the scale
automatically tares the container if it is placed on the weighing platform.
Now place the parts to be counted into the container. The indicator shows only the number of parts in
the container in the display.
Counting pieces when removing from a container
In weighing mode, place the full container with the parts on the weighing platform and press the
key. The display shows
and
appears.
If necessary, you can enter the reference quantity now. To do this, proceed as described above. Unless
part weights are stored in the indicator, you can also call up the average piece weight (APW) from the
CLU memory.
Press the
key to enter piece counting mode. Remove the desired number of parts from the
container. The indicator now shows the number of pieces removed with a minus sign in the display.
Press the
key for a further count of removed pieces.
To return to the weighing mode, press the
key.
Sum function in piece counting mode
The indicator has a sum function, with which successive counts can be summed up. Place the parts to
be counted onto the weighing platform. Once the scale is stable and the
icon disappears, press the
M+
key. The indicator adds the current value of the piece count to the total count value. The display first
shows the total number of counts and then the total count value.
This process can be repeated any number of times (up to 999 times) by pressing the M+ key. After each
summing operation, the display shows the number of counts and then the total value respectively.
By pressing the MR key, the total value will be called up and displayed.
To print the total value, press the
key as soon as the total value is displayed.
To delete the total value, press the
MC
key and confirm the security query [CLEAr] with
.
