IRIS-4 160
Quick Installation and
Maintenance Guide
5
4
IRIS-4 160
3. PaCkage ContentS
Contents:
• Dialler board in plastic housing
• 3 x screws and plugs for fixing the housing to a flat surface
• 2 x screws and washers for fixing PCB to plastics
• Ethernet cable
• 18k Ohms sense resistor for dial capture tamper detection
4. BoaRD ConFIguRatIon
5. BeFoRe You StaRt
Monitoring Centre (aRC)
Make sure that the monitoring centre to which the IRIS-4 160 device will send alarm signals is equipped with
the appropriate IRIS Secure Apps receiving system . The following information should be obtain from the
Monitoring Centre .
Dialler account number:
Monitoring centre IP address:
ethernet Connection Details
The customer’s Ethernet (LAN) network details are required in order to connect the IRIS-4 160 .
Obtain the following information from the customer .
Fixed IP address or DHCP:
Fixed DHCP
If using DHCP then the following information will not be required
as it will be assigned by the network.
IP address:
Gateway address:
Subnet mask address:
Wi-Fi Connection Details
The customer’s Wi-Fi network details are required in order to connect the IRIS-4 160 and the configuration
device (e .g . Smart Phone) . Obtain the following information from the customer .
Network name (SSID):
Security type:
(WEP/WPA/WPA2)
Password:
4g/3g/2g SIM Card and access Point name
If the installation uses 4G/3G/2G then a SIM card will be required . The IRIS-4 160 will also need to be given
a 4G/3G/2G ‘Access Point Name’ (APN) and other possible configurations as shown below . Obtain these from
the SIM card provider .
Access Point Name (APN):
User name (USR):
Password (PWD):
SIM Pin:
Due to the lack of space on this page, I suggest putting
LeD InDICatIon-tabell into another suitable location.
I suggest on page 15.
13
14
15
16
12
11
1
9
6
2
3
1
5
4
7
8
10
①
= Release clip
②
= Sense
③
= DC power
④
= Micro USB
⑤
= Serial (TTL)
⑥
= RS485
⑦
= RS232
⑧
= Relays
⑨
= Dial capture port
screw terminals
⑩
= Pin inputs
⑪
= AP Button
⑫
= Ethernet
⑬
= Battery case
⑭
= SIM card holder
⑮
= 4G/3G/2G antenna
⑯
= SYS LED
